Introduction

The HP LaserJet 1005 Series printer is designed to print documents easily. It provides 600 dots-per-inch (dpi) printing at

a rate of 14 pages-per-minute (ppm) on A4-sized paper. The simple control panel and improved paper handling make this

 product very easy to use. It delivers laser-quality printing through a direct (local) universal serial bus (USB) or parallel connection

 to a computer. The printer can then be shared with other users on a network using Microsoft (R) Windows sharing. All software

options are available to network users through this type of networking.

The printer’s main input tray has a 250-sheet capacity for continuous, multiple-page printing. Manual, single-sheet printing is

 possible through the priority input tray. Both trays are center-justified for all supported paper sizes. The printer output bin holds

 up to 125 sheets.

Physical specifications

The following table indicates the physical specifications for the HP LaserJet 1005 Series printer.

Category	Specification
Height	253 mm (10.0 inches)
Depth	486 mm (19.1 inches)
Width	415 mm (16.3 inches)
Weight (cartridge installed)	7.3 kg (16.1 lb)

Environmental specifications

The following table indicates the environmental specifications for the HP LaserJet 1005 Series printer.

Category	Specification
Operating environment - printer plugged into an alternating current (AC) outlet	Install in a well-ventilated, dust-free area. Temperature: 10 to 32.5 degrees Celsius (C) (50 to 90.5 degrees Fahrenheit [F]) Humidity: 20% to 80% relative humidity (no condensation)
Storage environment - printer not plugged into an AC outlet	Temperature: 0 to 40 degrees C (32 to 104 degrees F) Humidity: 10% to 80% relative humidity (no condensation)

Power specifications

The following table indicates the power specifications for the HP LaserJet 1005 Series printer.

Category	Specification
Power requirements	110-127 volts (V) of alternating current (VAC) (+/-10%), 50/60 Hertz (Hz) (+/-2) or 220-240 VAC (+/-10%), 50/60 Hz (+/-2) NOTE: Power sources are not interchangeable.
Power consumption (in continuous copy mode)	285 watts (W) on average
Power consumption (standby/power save)	Less than 10 W
Power consumption (idle)	7 W
Power consumption (off)	0 W
Minimum recommended circuit capacity	4.5 A at 115 V 2.3 A at 230 V

Performance specifications

The following table indicates the performance specifications for the HP LaserJet 1005 Series printer.

Category	Specification
Print resolution	600 dpi
Print speed	14 ppm (A4)

Skew specifications

The following table indicates the skew specifications for the HP LaserJet 1005 Series printer.

Category	Specification
Print skew - left	0.8% (2 mm over 250 mm in length) for cut-sheet media 1.5% (3.3 mm over 220 mm in length) for cut-sheet media 0.87% (1.65 mm over 190 mm in width) for cut-sheet media
Print skew - right	1.5% (3.3 mm over 220 mm in width) for envelopes, postcards, A5, and cut-sheet media
Cut-sheet leading edge skew	0.87% (1.6 mm over 190 mm in width)

Acoustic specifications

The following tables indicate the acoustic specifications (noise levels) for the HP LaserJet 1005 Series printer, tested at

14 ppm (per ISO 9296).

Printer capacities and ratings specifications

The following table indicates the printer capacities and ratings specifications for the HP LaserJet 1005 Series printer.

Category	Specification
Print speed	14 ppm First page out in less than 10 seconds
Paper input tray capacity	250 sheets of regular weight 20 lb (75 g/m2) paper or up to 30 envelopes
Output bin capacity	125 sheets of regular weight 20 lb (75 g/m2) paper
Minimum media size	76 x 127 mm (3 x 5 inches)
Maximum media size	216 x 356 mm (8.5 x 14 inches)
Media weight	Output bin - 60 to 105 g/m2 (16 to 28 lbs) Straight through media path - 60 to 163 g/m2 (16 to 43 lbs)
Base memory	1 megabyte (MB) of random-access memory (RAM)
Print resolution	600 dpi
Duty cycle	7,000 single-sided pages per month
PCL	Level 5e via MS-DOS (R) programs running in a Windows MS-DOS DOS shell